Configuration4–20
Options 31–41 — Control Code Assignments Discussion
Eleven configuration options are included in this group. Each option has ten
configuration selections that can be assigned to an associated control code.
When the control code assigned to a specific configuration option appears in
the data stream, the printer will operate in response to the selection in that
option.
For example, if Configuration Option 33.4 (8 lpi) is set, code 03 Hex (ETX)
functions as Code 06 Hex (ACK), the code that causes the printer to shift
from 6 lpi to 8 lpi.
Configuration options 31 through 41 can also be used with the P–Series
programming standard for the Host Mode Control (refer to Configuration
Option 20).
MVP/L150
Option
Number Display Option 31
Control Code Assignment – 01 Hex
.0 31.0 Host Mode Control Header 01H (SOH) (default).
.1 31.1 Host Mode Control Header 01H (SOH).
.2 31.2 Even dot plot. Code 01H (SOH) performs the same as code 04H
(EDT).
.3 31.3 Odd dot plot. Performs the same as 05H (ENQ).
.4 31.4 8 lpi. Performs the same as 06H (ACK).
.5 31.5 Elongated characters. Performs the same as 04H (EDT).
.6 31.6 Shift Out (alternate font select). Performs the same as OEH (SO).
.7 31.7 Shift In (alternate font deselect). Performs the same as OFH (SI).
.8 31.8 Ignored.
.9 31.9 Ignored.