Graphics5–22
Exiting P–Series Plot Mode
When you want to return to the print mode from the P–Series Plot mode,
include an extra line feed in the data stream to maintain proper print line
registration relative to the last line of plot graphics. If the extra line feed is
not included, the first character line after the graphics data may be truncated,
as shown in Figure 5–11.
@ABCDEFGHIJKLMNOPQR
plot data plot data
In this example, a text line follows plot data,
preceded by a single line terminator code.
(Text characters extend into the range of the
previously printed plot line and appear
truncated.)
This example shows a text line following
plot data, but preceded by an additional line
terminator code. (Characters are able to be
printed full–height.)
@ABCDEFGHIJKLMNOPQR
Figure 5–11. Truncated Character Line