3.Feed the paper into the slot from underneath if the printer is on a pedestal or from the front if the printer has a front feed attachment. Continue to feed the paper until it passes between the ribbon mask and the wide metal bar.
Paper
Pedestal
Slot
4.Load paper on the left tractor sprocket pins and close the tractor gate. Load paper on the right tractor sprocket pin. Make sure the paper is aligned horizontally (the correct holes are across from one another), and close the right tractor gate.
Sprocket Holes
5.If the left tractor was kept stationary, proceed to step 7. If not, slide both tractors so that the edge of the paper lines up with the first mark on the printer’s ruler, or where you want the left margin to print. Lock the left tractor lever (the black lever).
Ruler
Operation |
