RAD Data comm E1/T1 operation manual IP Routings Settings, Interface Address

Chapter 5 Setup Menu FCD-IPMInstallation and Operation Manual

IP Routings Settings

Advanced Menu

↓1

Setup Menu

↓2

Routing/Bridging

↓3

IP Routings Settings

IP ROUTING SETTINGS ( Device name - FCD-IPM)

1.Interface address

2.Routing Protocol

3.Maximum transmit unit

4.DHCP relay

5.IP address pool setting

6.PC remote access

7.OSPF Setup

ESC - Return to previous menu

Choose one of the above:

Figure 5-17. IP Routing Settings

Interface Address

Select this parameter to enter an IP address for the WAN interface and one or more IP addresses for the LAN interface. Multiple IP addresses on the LAN are useful in environments with multiple IP nets on the LAN (refer to Figure 5-18). If your FCD-IPM setup has two LAN interfaces use this screen to enter one or more IP addresses for the second LAN.

WAN

WAN IP Address

FCD-IPM

LAN IP Address

IP Net 1 IP Net 2

Figure 5-18. WAN and LAN Interface Addresses

5-16 Routing/Bridging Menu