RAD Data comm E1/T1, Modular Access Device with Integrated Router RX/TX Gains, Interface Type

Chapter 5 Setup Menu FCD-IPMInstallation and Operation Manual

Forced Idle signaling is held on hook for the duration of the Out of Service condition Forced Busy signaling is held off hook for the duration of the Out of Service condition.

E & M Voice Interface

VOICE PARAMETERS: (Device name - FCD-IPM E&M)

-----------------

1.TX/RX gains

2.	Interface type	: [4W]
3.	E&M type	: [A bit]
4.	Coding law	: [A LAW]

5.E signal from the E1 on: [A bit]

6.M signal to the E1 on : [A bit]

7.Default ABCD to the E1 : [0000]

8.Out of Service method : [Forced Idle]

ESC - Return to previous menu

Choose one of the above:

Figure 5-66. E & M Voice Interface

RX/TX Gains

Select this parameter to specify the nominal input level of the receive and transmit paths for each voice port. The input level range is –10 to +5 dBm.

Interface Type

This parameter specifies the interface type:

2W	2-wire interface
4W	4-wire interface.

E&M Type

This parameter specifies the E&M signaling mode:

•Type1

•Type2

•Type3

•Type5 – SSDC5.

Coding law

Select this parameter to specify the compounding law to be used by the voice channels. The values are:

5-62 Interface Parameters Menu