RAD Data comm E1/T1, Modular Access Device with Integrated Router Snmp Traps, Supported Traps

Appendix C SNMP Management FCD-IPMInstallation and Operation Manual

2.Choose Setup Host Parameters.

3.Choose SNMP Manager Table.

4.Add the NMS station IP address to the manager list.

5.Choose YES under MASK parameter to open the trap mask.

C.3 SNMP Traps

The SNMP agent of the FCD-IPM supports the standard MIB-II traps. In addition, each FCD-IPM alarm is sent as a specific trap to the management station.

Supported Traps

The supported traps are:

•Cold Start

•Link Down

•Link Up

•Authentication Failure

•Dsx1LineStatusChange.

This trap provides alarm indications for the following alarms:

1	dsx1NoAlarm	No alarm present
2	dsx1RcvFarEndLOF	Far end LOF (Yellow alarm)
16	dsx1XmtAIS	Near end sending AIS
32	dsx1LossOfFrame	Near end LOF (Red alarm)
64	dsx1LossOfSignal	Near end loss of signal
128	dsx1LoopbackState	Near end is looped
512 dsx1RcvFarEndLOMF		Far end sending TS16 LOMF
1024 dsx1XmtFarEndLOMF		Near end sending TS16 LOMF.

C-6 SNMP Traps