RAD Data comm Modular Access Device with Integrated Router, E1/T1 Add Filters Menu Terms

FCD-IPMInstallation and Operation ManualChapter 5 Setup Menu

	Table 5-30. Add Filters Menu Terms
Terms	Description
Protocol	Protocol on which the filter operates
Operation	Action of the filter
Interface	Filter interface
Source Address	Source address of passing frames
Destination Address	Destination address of passing frames
High level (IP only)	Includes or excludes high-level protocols
Source/Destination Port	Port source/destination address of an application
Source/Destination Socket	Socket source/destination address of an application
Low Level	Includes or excludes the low level protocols
Mask	Mask filter
Status	Filter's status

True-False Menus

Many of the Advanced Filter parameters can be configured so that:

•Frames with that parameter pass (true)

•Frames without that parameter pass (false).

For example, if you choose BroadCast-True, any frame which iis BroadCast will pass. If you choose BroadCast-False, any frame which iis nott BroadCast will pass.

Advanced Filter Parameters

Table 5-31. Advanced Filter Parameters

Parameter	Possible Values	Description
Filter ID		System automatically assigns a new number to each filter
Protocol		Protocol on which the filter operates

Operation Forward

Block

Connect

Disconnect

Action which the filter applies to a frame that passes

The operations are listed in their order of priority. For example if the connect and disconnect commands are applied to a frame, the connect command takes precedence.

Note: Connect and disconnect are only relevant to Connection on Demand. When accessed through the Filter menu, only they appear.

WAN Economy Menu 5-87