RAD Data comm E1/T1 FCD-IPM supports all these mechanisms simultaneously, IP Address Pool, Dhcp

Chapter 5 Setup MenuFCD-IPMInstallation and Operation Manual

	Table 5-9. IP Address Pool Setting (DHCP) (Cont.)
Values	Description
DHCP	This protocol is an extension to BOOTP and permits FCD-IPM to
	supply not only an IP address but also additional parameters, such as
	Default Gateway, DNS server addresses etc. FCD-IPM supplies these
	parameters to the client's workstation. In contrast to BOOTP, DHCP
	supplies these parameters on a temporary basis. FCD-IPM using DHCP
	checks on the workstation periodically. If the workstation is not using
	the IP address, the IP address can be supplied to other workstations
	later.

FCD-IPM supports all these mechanisms simultaneously.

IP Address Pool

Select this option to define IP address information.

IP ADDRESS POOL (Device name FCD-IPM)

----------------

Pool of IP addresses dynamically allocated by the device working as Remote Access server or DHCP server to workstations over the WAN/LAN.

Allocation can be made via DHCP, BOOTP, and PPP-IPCP request.

1.IP Address 001.001.001.001 – 001.001.001.005 Mask: 255.255.255.000

Default gateway: 001.001.001.001

Primary DNS: 194.090.001.005, Secondary DNS: 000.000.000.000

Interface: LAN 1

OPTIONS: C-Clear all, E-Edit, D-Delete, A-Add

Press one of the above or ESC to return to previous screen:

Figure 5-19. IP Address Pool Menu

You can define up to five entries. Each entry contains the parameters shown in Table 5-10.

5-18 Routing/Bridging Menu