RAD Data comm Modular Access Device with Integrated Router, E1/T1 Reset Options, Terminal Type

FCD-IPMInstallation and Operation Manual Chapter 4 Configuration

Download Device Parameters from TFTP Server

Select this option to load device configuration parameters from a file by downloading from the TFTP server.

To download device parameters:

1.Activate the TFTP server application connected to the unit via an IP network.

2.Configure the following IP parameters: IP address, IP mask and IP default gateway.

3.Select the TFTP download option.

4.Enter the TFTP server IP address.

5.Enter the name of the configuration file you want to download from the server, for example V35_file.

6.Press S to start the download process.

Note Upon completion of the download process, the unit performs reset. The new parameters only come into effect after resetting.

Reset Options

Select this option for resetting the device, link, or interface module.

Terminal Type

Select this option to choose a terminal type. Since each terminal type uses different ASCII control codes for cursor control, FCD-IPM requires this information to display the screens clearly. This setting affects the Statistics screen display only.

Advanced Setup Menu 4-25