RAD Data comm E1/T1 operation manual Type Wire unconditioned dedicated line Line Coding, Range

Chapter 1 Introduction		FCD-IPMInstallation and Operation Manual
	Signal Level	Receive level:
		• FCD-IPM with CSU: 0 to –36 dB
		• FCD-IPM without CSU: 0 to –10 dB
		Transmit level:
		• FCD-IPM with CSU: 0, -7.5, -15,
		-22.5 dB
		• FCD-IPM without CSU: soft adjustable at
		0 to 655 ft.
	Jitter Performance	As per AT&T TR-62411
	Connectors	Balanced interface: RJ-48c 8-pin connector
		Unbalanced interface: two BNC coaxial
		connectors
	Compliance	AT&T TR62411, ANSI T1.403
	Diagnostics	User available local and remote loopbacks
		Network activated loops and FDL loops
		(RLB, LLB)
SHDSL Interface	Type	2-wire unconditioned dedicated line
	Line Coding	TC-PAM
	Range	See Table 1-1
	Impedance	135Ω
	Connector	RJ-45
	Protection	ITU K.21, UL1950
Analog Voice	Number of Voice	4 per card
	Channels
	Modulation Method	PCM (per ITU-T G.711 and AT&T
		PUB-43801)
		∝-Law or A-Law
	Interfaces	E&M: 2-wire or 4-wire, supporting different
		types of E&M signaling: RS-464 Types I, II,
		III, and V, and BT SSDC5, configured by
		software
		FXS: Loop start, WINK start (reverse polarity)
		for direct connection to a 2-wire telephone

1-12 Technical Specifications