Chapter 1 Introduction FCD-IPM Installation and Operation Manual
1-2 Overview
E1/T1 over fiber optic links with interfaces:
850 nm LED for use over multimode fiber at distances up to 5 km (3 miles)
1310 nm LED for use over single mode fiber at distances up to 47 km (29 miles)
1310 nm laser diode for use over single mode fiber at distances up to 62 km
(38 miles)
1550 nm laser diode for use over single mode fiber for extended range
up to 100 km (62 miles)
ST, FC/PC, or SC connectors.
Interfaces/connectors for WAN:
V.35 with 34-pin female via adapter cable
V.24/RS-232 or RS-530 with 25 pin D-type, female
X.21 with 15-pin D-type, female via adapter cable
V.36/RS-422 with 37-pin D-type, female via adapter cable.
• LAN interface options:
One or two ports
Port types:
LAN 1 – 10/100BaseT with RJ-45 connector (UTP) or 10Base2 with coax
connector (BNC)
LAN 2 – 10BaseT with RJ-45 connector (UTP), 10Base2 with coax
connector (BNC).
4-port Ethernet/Fast Ethernet switch.
• I/O data channel slot options:
I/O1 upper slot
I/O2 lower slot
Card insertion options:
4 analog voice ports (quad FXS or FXO or E&M)
8 analog voice ports (2 × quad FXS or FXO or E&M)
Sub E1/T1
2 × Sub E1/T1 cards
4 analog voice ports + Nx64K cards
Sub E1/T1 + Nx64K cards
Nx64K cards (V.24, V.35 or V.11)
5 Port Ethernet 10/100 Switch