RAD Data comm Modular Access Device with Integrated Router, E1/T1 Example of Argument

FCD-IPMInstallation and Operation Manual Chapter 5 Setup Menu

Argument

The argument is any string without apostrophes, quotation marks or unsigned integers (depending on the command). In addition to ASCII symbols, the argument string can include any control characters with ASCII codes from 1 to 31. While editing scripting commands, these symbols are entered in the ‘control’ mode i.e. each symbol is entered as "^", followed by the corresponding ASCII character from "A" to "[". The letters must be in upper case. Refer to Table 5-29.

Table 5-29. Example of Argument

Code to wait/send	Control Sequence
0x0A (line feed)	^J
0x0D (carriage return)	^M
0x0B (escape)	^[

Access Control (Security) Menu 5-79