RAD Data comm Modular Access Device with Integrated Router, E1/T1 Shdsl Settings, Odd, Even

FCD-IPMInstallation and Operation ManualChapter 5 Setup Menu

		Table 5-14. Link Settings (Cont.)
Parameters	Possible Values	Description
Parity	Odd	Specifies the parity. Parity is a method of checking for errors. A
	Even	parity bit is a non-information bit that is added to a group of bits
		to ensure that the total number of bits in a character is odd or
	None
		even. If you know that the total number of bits must be odd any
		group of bits whose total number is even must be erroneous.
		Note: For Asynchronous links only.
Stop Bit	1, 2	Specifies the stop bit quantity. The stop bit is a signal at the end
		of a character that instructs a receiving device to wait for a
		subsequent signal.
		Note: For Asynchronous links only.
Modem Settings		Displays a menu which allows configuration of modem
		parameters.
		Note: For Asynchronous links only.

SHDSL Settings

Advanced Menu

↓1

Setup Menu

↓3

Interface Parameters Menu

↓2

SHDSL Settings

SHDSL SETTINGS (Device name - FCD-IPM)

--------------

1.SHDSL parameters

2.SHDSL loops

ESC - return to previous menu

Choose one of the above:

Figure 5-33. SHDSL Settings Menu

SHDSL link is used to transport E1 data. The SHDSL rate is always fixed, it is determined by the number of E1 timeslots assigned to carry data (including timeslot 0 and timeslot 16).

FCD-IPM can be configured to operate as an STU-C (central) or STU-R (remote) device.

When configured as STU-C SHDSL rate is fixed (according to the number of E1 timeslots carrying data). When configured as STU-R, the SHDSL rate is adaptive.

Interface Parameters Menu 5-29