RAD Data comm Modular Access Device with Integrated Router T1 Setup Menu, 17. T1 Setup Parameters

FCD-IPMInstallation and Operation Manual Chapter 5 Setup Menu

•When CRC-4 is enabled, diagnostics are available for the last 24 hours collected in 15-minute intervals (similar to the AT&T PUB 54016).

T1 Setup Menu

T1 SETUP: LINK 1 (Device name - FCD-IPM)

----------------

1.Clock master : [Link 1]

2.Multiplier : [64 kbps]

3.Time slots mapping

4.General Diagnostics

5.T1 parameters

6.Additional Cards parameters

7.Alarms filter

8.Advanced Setup

ESC - Return to previous menu

		Figure 5-41. T1 Setup Menu
		Table 5-17. T1 Setup Parameters
Parameters	Possible Values	Description
Clock Master		Selects the source clock that synchronizes the whole T1
	Internal	network
		FCD-IPM generates the system source clock from an internal
	Link 1	clock oscillator.
		FCD-IPM recovers the clock from the data received from the
		T1 link1
	I/O1 SUB T1	For FCD-IPM with a sublink:
	I/O2 SUB T1
	FIX SUB T1	FCD-IPM recovers the clock from the data received from one
		of the T1 sublinks
Multiplier	56 kbps, 64 kbps	Sets the data rate of each DATA time slot.

Interface Parameters Menu 5-35