RAD Data comm E1/T1 Interface Parameters Menu, To access the Interface Parameters menu

Chapter 5 Setup Menu FCD-IPMInstallation and Operation Manual

5.3 Interface Parameters Menu

Select this option to set general parameters and link, Frame Relay, ISDN or E1/T1 parameters.

The Interface Parameters menu is dynamic, depending on the hardware configuration. Only those screens / parameters that are applicable to your interface will appear.

Advanced Menu

			1	Setup
3			2
Interface Parameters
			Device Control
1	2	SHDSL	3	E1/T1	4	5	Frame
Link					ISDN		Relay
Settings		Settings		Settings	Settings
							Settings
1. Status		1. SHDSL		1. Clock
		Parameters		Master
2. Type		1. Line Mode		2. Multiplier

2. Standard

3. Time Slots

3. Connection

Mapping

1. Asynchronous

Type

3. PSD

4. General

2.Synchronous

4. Connection

4. SNR Margin

Diagnostics

Timeout (sec)

5. SNR Margin

5. E1/T1

3. Frame Relay

Parameters

5. Control

Threshhold

6. Additional

Signals Mode

Cards Parameters

6. Loop Attenuation

6. Clock

Threshhold

7. Alarms

Rate

Filter

2. SHDSL

Loops

8. Advanced

Setup

Figure 5-30. Interface Parameters Menu Outline

To access the Interface Parameters menu:

1.In the Advanced Menu, press 1. The Setup menu appears.

2.In the Setup menu, press 3.

The Interface Parameters menu appears.

5-26 Interface Parameters Menu