Chapter 5 Setup Menu FCD-IPM Installation and Operation Manual
5-86 WAN Economy Menu
In FCD-IPM 2 LANs configuration:
For LAN1, use Quick Filters
For LAN2, use Advanced Filter.
Advanced Filters
There are 4 steps in defining an Advanced Filter:
1. From the Advanced Setup menu, choose:
Set up → WAN Economy → Filters.
2. Choose Advanced Filter.
3. If you are defining a new filter, choose Add.
If you are editing a filter, choose Edit and enter the filter number.
4. Define the desired parameters.
Advanced Filter Concepts
When defining an advanced filter the following parameters must be determined:
• Filter ID - A selection number used to view, edit or delete a particular file. To
work with any filter, the Filter ID number must be entered.
Add Filters Menu
ADD FILTERS ( Device name - FCD-IPM )
ENTER - Enter data
SPACE - Toggle (parameters inside [] )
N - Next line (skip this one)
SPACE - Move right
BACKSPACE - Move left
ESC - Return to previous menu
Filter Id - 1
Figure 5-90. Add Filters Menu
Table 5-30 lists the terms used in the filters menu.
Note