RAD Data comm Modular Access Device with Integrated Router Toggle between Block and Forward

FCD-IPMInstallation and Operation Manual Chapter 5 Setup Menu

To configure the operation:

1.From the Filters menu, choose Block and Forwarding.

2.Toggle between Block and Forward.

To configure the broadcast control:

The broadcast control filter manages special frames, normally not propagated throughout the network. The frames managed are:

•IP - Local broadcast propagation

•IPX - Zero destination propagation, IPX Type 20 frames propagation

•NETBIOS over IP - IP frames with TCP/UDP ports 137, 138, 139 propagation.

From the Filters menu, press 2 to toggle between Full Propagation and Block

Propagation.

Factory default: Block Propagation.

Quick Filters are defined per protocol. Configure each protocol that you want to block or forward.

To configure the Quick Filter parameters:

1.From the Filters menu, choose Quick Filters.

The Quick Filters menu appears (refer to Figure 5-89).

2.To toggle between Forward/Block, press the number of the protocol that you want to filter.

QUICK FILTERS (Device name - FCD-IPM)

Choose the protocols you want to block or forward!!: (The Blocking or forwarding is to interface LAN 1 only)

1.	IP	NO FILTERS
2.	IPX	NO FILTERS
3.	SNA	NO FILTERS
4.	NetBIOS	NO FILTERS
5.	AppleTalk	NO FILTERS
6.	DECnet	NO FILTERS
7.	Others	NO FILTERS

ESC - Return to previous menu

Choose one of the above:

Figure 5-89. Quick Filters Menu

WAN Economy Menu 5-85