RAD Data comm E1/T1, Modular Access Device with Integrated Router Frame Relay Dlci Parameters

Chapter 5 Setup Menu FCD-IPMInstallation and Operation Manual

Frame Relay DLCI Parameters

Table 5-25. Frame Relay DLCI Parameters

Parameters	Possible Values	Description
DLCI	16 to 991	Specifies the DLCI number
State	Enabled	Specifies the DLCI state
	Disabled

CIR	The value of this parameter is
	obtained from the Frame
	Relay provider.

Specifies the maximum amount of data (in bits) which the network guarantees to transfer during the measurement interval (the measurement interval is usually one second)

Excess	The value of this parameter
	should be received from the
	Frame Relay provider.

Specifies the maximum amount of uncommitted data bits that the network will attempt to deliver during the measurement interval

Throughput	Specifies the average number of data bits per second
	transferred by the network. When a measurement
	interval of one second is assigned to the CIR, the
	throughput value should equal the CIR value.

5-72 Interface Parameters Menu