RAD Data comm operation manual E1/T1 Diagnostics, To refresh or clear statistics

Chapter 4 Configuration FCD-IPMInstallation and Operation Manual

To refresh or clear statistics:

•From the SHDSL Status screen, type R to refresh the display or type C to clear the SHDSL statistics.

E1/T1 Diagnostics

Select this option to display error information for the E1/T1 link. This information enables you to evaluate the line quality. The errors are accumulated in 15-minute intervals. FCD-IPM keeps up to 96 intervals (for 24 hours).

In addition, there is a rolling 24 hour total of each error parameter. The rolling total is displayed for the interval parameter called TOTAL. The interval parameter called CURRENT is the open interval, which did not yet reach 15 minutes. The errors counted in the CURRENT interval are not included in the TOTAL interval. The amount of time that has elapsed is displayed on the right of the CURRENT parameter line. T1 diagnostics are available only when frame mode is ESF. E1 diagnostics are available only when CRC-4 is enabled.

T1 DIAGNOSTICS - LINK 1			(Device name - FCD-IPM)
-----------------------
INTERVAL	ES	UAS	SES	BES	LOFC	CSS	DM
--------	-----	-----	-----	-----	-----	-----	-----
CURRENT	1	163	173	1	1	0	02.53 min

	ESC - previous menu			R - Refresh	C - Clear diagnostics
				Figure 4-42.		T1 Diagnostics
	E1 DIAGNOSTICS - LINK		1	(Device name - FCD-IPM)
--------------
	INTERVAL	ES	UAS	SES	BES	LOFC	CSS	DM
	CURRENT	0	0	0	0	0	0	06.15 min
1		0	0	0	0	0	0
2		0	0	0	0	0	0
3		0	0	0	0	0	0
4		1	0	0	1	0	0
	Total	1	0	0	1	0	0	0

ESC – previous menu R – Refresh C – Clear diagnostics

Figure 4-43. E1 Diagnostics

4-38 View Menu