RAD Data comm Vmux-2100 Bundle Configuration Menu, To configure an existing bundle

Chapter 4 Management from a Terminal Vmux-2100Installation and Operation Manual

Bundle Configuration

1.Add Bundle

2.Delete Bundle

3.Edit Bundle

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-32. Bundle Configuration Menu

3.From the Bundle Configuration menu, choose Add Bundle. The Add Bundle menu appears.

4.Add a bundle by choosing its number.

To configure an existing bundle:

1.From the Bundle Configuration menu (see Figure 4-32), choose Edit Bundle. The Edit Bundle menu appears (see Figure 4-33).

Edit Bundle

1.Enter Bundle Number [1 - 5]... (1)

2.Connect > (No)

3.Function> (TDMoIP)

4.	Max Bytes In Multiplexed Frame [100 -	1461]...	(500)
5.	Destination IP... (0.0.0.0)
6.	Destination Bundle[1 - 5]... (1)
7.	Packetizing Interval (msec)[10 - 90]...	(30)
8.	Connectivity Parameters
9.	TOS Parameters
10.	Voice Parameters
11.	VLAN Parameters
12.	Bundle Name... ()

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-33. Edit Bundle Menu

2.From the Edit Bundle menu, choose Enter Bundle Number and select a bundle (1 through 5) to configure.

3.Configure the following parameters of the selected bundle:

Connect:

Yes (bundle is connected)

No (bundle is not connected)

4-26 Configuring Main Link and Voice E1/T1 Ports