RAD Data comm Vmux-2100 Voice Trunking Gateway operation manual Signaling Configuration Menu

Chapter 4 Management from a Terminal Vmux-2100Installation and Operation Manual

Signaling Configuration

1.Signaling Profile Configuration

2.SS7 Keep-Alive Suppression Rate (0% - No Suppression / Not SS7)

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-15. Signaling Configuration Menu

2.From the Signaling Configuration menu, choose Signaling Profile Configuration.

The Signaling Profile Configuration menu appears (see Figure 4-16).

Signaling Profile Configuration

1. Enter Profile Number To Configure [1 - 5... (1)

2. Signaling Table Configuration []>

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-16. Signaling Profile Configuration Menu

3.From the Signaling Profile Configuration menu, choose Enter Profile Number To Configure.

4.Enter the number of the signaling profile that you want to configure by typing a number from 1 to 5, and pressing <Enter>.

5.From the Signaling Profile Configuration menu, choose Signaling Table Configuration.

The Signaling Table Configuration menu appears (see Figure 4-17).

Signaling Table Configuration
	ABCD BITS	A Bit		B Bit	C Bit	D Bit
			A	B	C	D
	IDLE SIGNAL		1	0	1	1
	OOS SIGNAL		1	0	1	1
1.	0	8.	NOT C
2.	1	9.	D
3.	A	10.	NOT D
4.	NOT A
5.	B
6.	NOT B
7.	C

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit ?-help

Figure 4-17. Signaling Table Configuration Menu

4-14 Configuring the Vmux-2100 System