RAD Data comm Vmux-2100 operation manual Sanity Error and Warning List, Sanity Errors and Warnings

Chapter 7 Monitoring and Statistics Collection Vmux-2100Installation and Operation Manual

Sanity Error and Warning List

Table 7-2lists in alphabetical order all sanity errors and warnings generated by Vmux-2100.

Table 7-2. Sanity Errors and Warnings

Display	Type	Description
BUNDLE IS NOT	Warning	A timeslot is assigned to a bundle which is not connected
CONNECTED
CARD DOES NOT EXIST IN	Warning	A voice card configured in the database is missing from a slot
SLOT
CARD EXISTS IN SLOT	Warning	A voice card installed in a Vmux-2100 slot is not configured in
		the database (the Hub menu).
CARD TYPE MISMATCH	Warning	A mismatch between a voice card or main link card installed in
		Vmux-2100 and its type configured in the database.
CCS TS NOT RELATED TO	Error	At least two timeslots of the E1/T1 port with the CCS signaling
THE SAME BUNDLE		are assigned to different bundles. To avoid it, assign all
		timeslots of the same E1/T1 port with the CCS signaling to the
		same bundle.
CCS TS NOT RELATED TO	Error	At least two timeslots of the E1/T1 port with the CCS signaling
THE SAME SLOT		are assigned to different destination slots. To avoid it, assign all
		timeslots of the same E1/T1 port with the CCS signaling to the
		same destination slot.
CODER PROBLEM	Error	Conflict in the DSP capacity and timeslot configuration. Since
		each DSP handles six timeslots, every six consecutive timeslots
		must be configured to use the same voice compression
		method.
CONNECTIVITY VALUES	Error	Connectivity values of all bundles which belong to the same
MUST BE THE SAME FOR ALL		group (have the same source IP) must be the same.
GROUP BUNDLES
DISCONNECT BUNDLE	Error	Voice compression type was changed for a connected bundle.
BEFORE CHANGING CODER		A mismatch between a voice compression type of an active
RATE		local bundle and that of the destination bundle may cause
		problems at a DSP. To avoid this, do the following:
		1. Disconnect a bundle of the local Vmux-2100.
		2. Disconnect destination bundle of the remote Vmux-2100.
		3. Change the voice compression method for both bundles.
		4. Reconnect the bundles.
DOUBLE ROUTE	Error	More than one timeslot is connected to the same destination
		timeslot
E1/T1 NOT THE SAME FRAME	Error	E1/T1 ports of the same group are configured to the different
TYPE		framing modes
EMPTY ADMINISTRATOR	Error	The last administrator account is deleted from the user
LIST		database.
EXTERNAL NOT	Warning	A timeslot is assigned to an E1/T1 port which is not connected
CONNECTED

7-6 Sanity Checks