RAD Data comm Vmux-2100 Voice Trunking Gateway Working with Permanent Buffer, Vmux-2100 Alarms

Vmux-2100Installation and Operation Manual Chapter 7 Monitoring and Statistics Collection

Working with Permanent Buffer

The permanent buffer is represented by the Alarm Status screen.

To access the Alarm Status screen:

•From the Display menu (see Figure 7-2), choose Display Alarm Status. Vmux-2100 displays the permanent alarm buffer (see Figure 7-4).

(047)	FAN No.	4	FAILURE	MAJOR
(047)	FAN No.	4	FAILURE	OFF
(20)	INTERNAL ERROR			Event

Press ‘y’ To Continue...

Press ‘n’ To Stop.

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 7-4. Permanent Buffer (Alarm Status Screen)

To delete inactive alarms from the permanent buffer:

1.From the Status menu (see Figure 7-1), choose Clear. The Clear menu appears.

2.Confirm the alarm deletion by choosing Clear all Alarms.

Vmux-2100 deletes all alarms in the OFF state and events from the permanent buffer.

Table 7-1lists the Vmux-2100 alarms according to their identification codes.

Table 7-1. Vmux-2100 Alarms

ID Code	Terminal Message	Description	Severity
18	DB UPDATE OCCURRED	Vmux-2100 database has been updated	Event
20	INTERNAL ERROR	Software error	Event

Note: The INTERNAL ERROR alarm is used for software debugging. To receive detailed description of each internal alarm, enable ‘Open Internal Alarms’ from the System menu (Main menu > Configuration > System > Open Internal Alarms).

21	MODULE WAS REMOVED	A voice module installed in the specified slot has	Event
		been removed
22	MODULE WAS INSERTED	A voice module has been inserted from into a slot	Event
40	POWER SUPPLY No. 1	Power supply 1 failure has been detected	Major
	FAILURE
41	POWER SUPPLY No. 2	Power supply 2 failure has been detected	Major
	FAILURE
42	POWER SUPPLY NO. 1	Power supply 1 has been removed from its slot	Major
	WAS REMOVED

Alarms 7-3