RAD Data comm Vmux-2100 Voice Trunking Gateway operation manual Controlling Telnet Access

Vmux-2100Installation and Operation Manual Chapter 4 Management from a Terminal

4.Choose Confirm and save password and then re-enter the new password to confirm the change.

5.To change the user access level, choose Change access level and then enter a new value (Monitor, Technician, Operator or Administrator) from the Change Access Level menu.

6.Choose Confirm and save access level and then enter the administrator password to confirm the change.

Displaying the User List

To display a list of registered users:

•From the User Administration menu, choose Show all users. The Show All Users screen appears (see Figure 4-13).

Show All Users
	UserName	Access Level	DBchange Date	DBchange Time
1	admin	Administrator	6/3/2001	18:16:5
2	qwerty	Monitor

@ - Db Update; # - Db Undo ESC-prev.menu; !-main menu; &-exit

Figure 4-13. Show All Users Screen

Controlling Telnet Access

You can disable Telnet access to Vmux-2100.

By disabling Telnet, you prevent unauthorized access to the system when security of the Vmux-2100 IP address has been compromised. When Telnet access is disabled, Vmux-2100 can be managed via an ASCII terminal or RADview.

To disable the Telnet access:

1.From the Management menu (Figure 4-6), choose Telnet. The Telnet value toggles between Enable and Disable.

2.Set to ‘Disable’.

Configuring the Vmux-2100 System 4-11