RAD Data comm Vmux-2100 Voice Trunking Gateway operation manual Vmux-2100 Default Settings

Vmux-2100Installation and Operation Manual Chapter 3 Operation

3.3 Default Settings

Vmux-2100 is managed by an ASCII terminal or PC running a terminal emulation program via menu-driven embedded software. Table 3-3lists the default settings of the Vmux-2100 configuration parameters.

Table 3-3. Vmux-2100 Default Settings

Parameter	Default Value
System
Set Host IP address	0.0.0.0
Set Subnet Mask	0.0.0.0
Set Default Gateway	0.0.0.0
Trap	public
Read	public
Write	private
Managers list	0.0.0.0
Telnet	Enable
Set Baud Rate	9600
Timeout	3
Dial-In Modem	Disable
		A	B	C	D
Signaling Profile
	Idle	1	0	0	0
	OOS	1	0	0	0
SS7 Keep-Alive Suppression Rate	0% - No Suppression / Not SS7
Hub
Slot 1	NO CARD
Slot 2	NO CARD
Slot 3	NO CARD
Slot 4	NO CARD
Main Link (Lan Parameters)
Set Auto Negotiation	Enable
Set Max Capability	100BaseT full duplex
Main Link (E1 Parameters)
Connect	No
Frame	732S
Restoration Time	1 second
Clock Source	Lbt
Interface Type	Ltu
Idle Code	ff

Default Settings 3-3