ENGLISH
System Menu Setting | Menü System verwenden |
DEUTSCH
Viewing the Demonstration
✤Before you begin: Make Sure that there is no tape inserted in the Camcorder. (see page 36)
✤Demonstration automatically shows you the major
functions that are included with your Camcorder so that | 1 |
you may use them more easily. |
✤ The Demonstration function may only be used in the Camera mode without a tape inserted in the Camcorder.
✤ The Demonstration operates repeatedly until the Demonstration mode switched Off.
1. Set the Power switch to CAMERA.
Demo-Funktion verwenden
✤Vor dem Start: Stellen Sie sicher, dass sich keine Kassette im Camcorder
befindet. (Siehe Seite 36.)
✤Die
die Bedienung des Geräts erleichtern.
✤ Die
✤ Die Demonstration wird so lange wiederholt, bis Sie die
2.Set the Mode switch to TAPE.
3. Press the MENU button. | 4 |
|
■ The menu list will appear.
4.Move the Menu selector to the left or right to select System, then press the Menu selector.
5.Move the Menu selector to the left or right to select Demonstration, then press the Menu selector.
Camera Mode |
√System |
Clock Set |
Beep Sound |
Language |
Demonstration |
√On
√English √On
1. | Stellen Sie den |
2. | Stellen Sie den Funktionsschalter auf TAPE. |
| (nur |
3. | Drücken Sie die Taste MENU. |
| ■ Das Menü wird angezeigt. |
4. | Bewegen Sie den Menu Selector nach links oder rechts, und |
| wählen Sie System. Drücken Sie dann den Menu Selector. |
5. | Wählen Sie über den Menu Selector die Option |
| Demonstration |
6.Move the Menu selector to the left or right to select On, then press the Menu selector.
7.Press the MENU button.
■ The Demonstration will begin.
8.To quit the Demonstration, press the MENU button.
[ Notes ]
■The Demonstration mode is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the Camera mode (no tape is inserted in the Camcorder).
■If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.
■While setting the NITE PIX to ON, the Demonstration function does not work.
Move | Select MENU Exit |
6 | Camera Mode |
|
| Back |
|
| Clock Set |
|
| Beep Sound |
|
| Language |
|
| Demonstration | Off |
|
| On |
Move | Select MENU Exit |
Samsung Camcorder is...
[Digital Camcorder]
| den Menu Selector. |
6. | Bewegen Sie den Menu Selector die Option On <Ein>. |
| Drücken Sie dann den Menu Selector. |
7. | Drücken Sie die Taste MENU. |
| ■ Daraufhin beginnt die Demonstration. |
8. | Drücken Sie die Taste MENU, um die Demonstration zu |
| beenden. |
[ Hinweise ]
■ Die |
im Camcorder keine Kassette befindet und das Gerät |
nach Einschalten des Aufnahmemodus länger als zehn |
Minuten nicht benutzt wird. |
■ Wenn Sie bei laufender |
drücken (FADE, BLC, PHOTO, EASY.Q), wird die |
Demonstration angehalten. Sie wird nach zehn Minuten |
fortgesetzt, wenn Sie in dieser Zeit keine anderen |
Funktionen aufrufen. |
■ Wenn die Funktion NITE PIX <Infrarotaufnahme> aktiviert |
wurde, kann die Demonstration nicht abgespielt werden. |
Demonstration
31