Key Operator Settings

CPress [OK].

Note

❒If you are making settings for the "G3–1 Analog Line," change the setting for the standard G3 line to PABX with User Parameters after registering the PSTN Access Number. See p.178 “User Pa- rameters” (switch 13 bits 1,0).

❒If you are making settings for the "G3–2 Analog Line," change the setting for the sec- ond G3 line to PABX with User Parameters after regis- tering the PSTN Access Number. See p.178 “User Pa- rameters” (switch 13 bits 3,2).

G Press [PrevMenu] four times.

H Press [Exit] to return to the standby mode.

7

G3 Digital Line

This function requires the optional ISDN Unit.

The following settings are available for G3 communications over ISDN:

•Own Fax Number 1

Enter the number of the line (PSTN) the machine is connected to.

•SPID (Own Fax Number 2)

Enter the second fax number if you are using two numbers for one line.

•Sub-address

See p.82 “Sub-address”.

•Own Fax Number (CSI) (maxi- mum 20 characters)

Enter Own Fax Number (Called Station Identification) that is trans- ferred to the other party during transmission or reception.

Note

❒Before storing the sub-address, store the Sub-address function in a User Function key. See p.154 “User Function Keys”.

❒Own Fax Number (CSI) is an inter- national identification number that is transferred to the other par- ty during transmission or recep- tion. This information appears on the display of the other party's fax machine and is printed on their lists and reports. The Own Fax Number (CSI) feature works with other manufacturer's fax machines that support this feature.

❒After registering the Own Fax Number 1 or 2, you can make set- tings so that the machine does not respond to incoming faxes that do not send their Own Fax Numbers with User Parameters. See p.178 “User Parameters” (switch 13 bit 5).

Reference

p.89 “Selecting the Line”

A Press the {User Tools} key.

B Enter the code for "Key Op. Tools" with the number keys. Then press the {q} key.

192