CATV or Satellite Receiver Connections
Connecting to a Cable Box or Satellite Receiver (1)
The following connection is the connection to a cable box or satellite receiver when receiving only a few scrambled channels. When many or all the channels are scrambled, see the connection on the next page.
Using this connection, you can:
•Record unscrambled CATV signals by selecting them on this recorder.
•Record scrambled CATV signals by selecting them on the cable box or satellite receiver and using AV AUTO REC function (See page 60).
•Record another channel while you watch one channel.
1 Connect the TV antenna
and coaxial cables as
shown on the left.
You can watch and record the TV channels.
NOTE
•The input signal to IN FROM ANTENNA jack is passed through to the OUT TO TV jack.
TV
2 Connect the VIDEO/AUDIO
To VIDEO/AUDIO
input jacks
Video/Audio cable (Supplied)
2
To antenna
input jack
Cable box/
Satellite receiver
Coaxial cable (Commercially available)
1
To antenna output jack
output jacks on this recorder to the VIDEO/ AUDIO input jacks on your TV using a Video/Audio cable.
You can watch discs.
3 Connect the VIDEO/AUDIO IN 1 jacks on this recorder to the VIDEO/AUDIO output jacks on your cable box or satellite receiver using a Video/Audio cable.
You can record scrambled CATV channels when using a cable box or satellite receiver for decoding.
VIDEO/AUDIO |
|
|
| To antenna |
output jacks |
|
|
| input jack |
Video/Audio cable |
| 3 | 1 | Coaxial cable |
(Commercially available) |
| (Supplied) | ||
IN 1 (AUTO REC) |
|
|
| To OUT TO |
VIDEO/AUDIO jacks |
|
|
| TV |
|
| COMPONENT |
| IN FROM |
| LINE |
| ANTENNA | |
|
|
| ||
| IN 1 | Y |
|
|
| AUTO |
| VHF/UHF/CATV | |
|
| OUT |
| |
DIGITAL OUT |
|
|
|
|
| IN 3 | PB |
| OUT TO TV |
| REC | (480I/480P) |
|
|
|
|
|
| |
OPTICAL | OUT | PR |
|
|
|
|
|
NOTE
•This is a standard video connec- tions. You can use
Important!
• | Connect this recorder directly to |
| your TV and not via the VCR, cable |
| box or satellite receiver. |
• | When using this connection, set |
| “PROGRESSIVE” in “PLAYBACK |
The Recorder
To VIDEO/AUDIO
output jacks
To IN FROM
ANTENNA
Antenna cable 1
To Antenna/CATV wall outlet
SETUP” to “OFF”. (When the |
setting is “ON”, the disc playback |
picture cannot be viewed.) |
After the Conneciton
Plug in the power cords of the TV and cable box/satellite receiver. Then go to “EZ Set Up” (see page 23).
21
21 | 03.1.14, 11:29 AM |
