Sharp DV-RW2U Connecting to Audio Equipment, Playing 2 channel audio with an Analog Connector

Connecting to Audio Equipment

Playing 2 channel audio with an

Analog Connector

1	DIGITALOPTICALOUT OUTAUTOINREC3		PPYRB		ToAUDIO	VHF/UHF/CATVOUTTO
			COMPONENT			FROM
	(Red)	R-AUDIO-L VIDEO S-VIDEO		OUT	outputjacks
		(White)
	LINE1		(480I/480P)
		AUDIO(commerciallycableavailable)
					Toamplifier
	JackAudio(Red)andequipmePlugnt,Colors(White)tc.audioinputjacks
	Audio	Left:White
		Right:Red

NOTE

•When connecting the audio equipment to the analog connection, we recommend that you set the

“DD LEVEL” in “PLAYBACK SETUP” to “OFF” (See page 81).

Playing Dolby Digital

(5.1 channel) and DTS audio with a Digital Connection

•Connecting an amplifier with a Dolby Digital/DTS digital surround processor or a Dolby Digital/DTS digital surround decoder to the recorder’s optical digital jack provides richer, more powerful audio play.

•To use DTS digital surround, press AUDIO to select DTS audio.

■Connection to a processor or amplifier with a optical digital input jack

		COMPONENT	IN FROM
	LINE R-AUDIO-L VIDEO S-VIDEO		ANTENNA
		OUT
	IN 1	(480I/480P)
		Y
	AUTO		VHF/UHF/CATV
	REC
DIGITAL OUT
OPTICAL	IN 3	PB	OUT TO TV
1	OUT	PR

To DIGITAL OUT

OPTICAL terminal

Optical digital cable (commercially available)

To optical digital input terminal

Dolby Digital (5.1ch)/

DTS processor or amplifier

Important!

•When using this connection, set the “Digital OUT” in “PLAYBACK SETUP” to “DIGITAL” (See page 81).

NOTE

•To play a disc recorded with DTS, you need to use DTS processor or amplifier.

•This connection is not possible if the processor or amplifier to which you want to connect does not have a optical digital input jack.

•Refer to the operation manual for the processor or amplifier for information about connecting to it.

93

DV_RW2U#p86-99.p65 93 03.1.9, 7:52 PM