Sharp DV-RW2U Problems of Timer Recording, Blinking the Timer Indicator, Problem Helpful Hint

Problems of Timer Recording

Blinking the TIMER Indicator

Timer recording cannot be performed in the situations shown below. Check the contents of the error and reprogram timer recording correctly. When an error occurs, the TIMER indicator on the recorder blinks for about 5 seconds.

	Front Panel Display	Causes		Solution	Setting correctly
		• There is no disc loaded	• Load a disc for recording, and after
				the disc has finished being identified,
				press TIMER ON/OFF to enter
		• A non recordable disc is
		loaded		standby.
TIMER			• When a disc for recording has already
indicator				been loaded in the recorder, turn on
		• There is enough blank
is		space on the disc		the power and after the disc has
blinking.				finished being identified, press TIMER
		• The disc is unplayable		ON/OFF to enter standby.
		• The disc that’s loaded is	• Enter standby after either canceling the
		protected		disc protect function or loading a different
				disc for recording in the recorder.
		• Timer Recording is full	•	Repeat timer recording after deleting
				some of the timer program.	TIMER indicator
					lights up.
		• The clock has not been	•	Repeat timer recording after setting
		set.		the clock.
		• The channel is incorrect	•	Check the channel that has been
Timer		• The Recording time is set		programmed for timer recording.
recording		at 1 minute	•	Reset the recording time to 2 minutes
does not				or more.
work.
	• The clock on the recorder is not set		•	Repeat timer recording after setting
	• Timer Recording or Simple Recording Timer has			the clock.
	been set		•	Program timer recording after the
	• Timer Recording is full			timer recording menu or simple
				recording menu has finished.
			•	Repeat timer recording after deleting
				the timer program.

NOTE

•Press ■STOP when you want to discontinue recording while timer recording is in progress. Timer recording is canceled when ■STOP is pressed. When there are other timer programs, enter standby by pressing TIMER ON/OFF.

•When timer programs are programmed that have the same recording starting date and time, the first timer program is overwritten.

When Timer Recording Times Overlap

Problem					Helpful Hint
	■ If two timer recording times overlap, the second timer program starts after the first
	timer program is finished.
Timer recording times overlap	Example: <Recording Times set>							<Recording actually made>
		First timer program				➜
									First timer program
				Second timer program						Second timer program
	7:00		8:00	8:30	10:00		7:00		8:30		10:00

NOTE

•When multiple timer programs have been set and the timer recording times overlap or the ending time of the first timer program overlaps the starting time of the second timer program, disc information is written and the second timer program starts after the first timer program is finished. Consequently, the start of the second timer program is delayed by a maximum of about 1 minute.

62

DV_RW2U#p62-70.p65 62 03.1.14, 9:34 AM