Sharp DV-RW2U manual Playback the playback-only discs, DVD Playback, Resume Function

Playback

POWER	TIMER	DISC	OPEN/
	ON/OFF	TIMER	CLOSE
ANGLE	AUDIO	CH
SETUP/	DNR	ZOOM	INPUT
FUNCTION
TITLE			MENU
RETURN			SET/
			ENTER
			VCR PLUS+
		TIMER PROG.
			REC MODE
AM/PM		ERASE PROGRAM
100
REV			FWD
	PLAY
REC			STILL/PAUSE
	STOP
SKIP	F.ADV		SLOW
SEARCH	SKIP
DISPLAY	ON	ORIGINAL/	EDIT
	SCREEN	PLAY LIST
POWER	INPUT	VOL

CH

TV CONTROL

DVD Playback

Playback the playback-only discs

DVD VIDEO

1 Turn on the TV and switch the TV channel to the external “VIDEO” or “AV” channel connected to the VIDEO/AUDIO output jacks.

2 Press POWER. The recorder is turned on.

3 Press OPEN/CLOSE to open the disc tray.

4 Load a disc onto the tray.

•Position it with the printed title side facing up, align it with the guides.

•When you load a double-sided disc, load it with the side you want to play face down.

5 Press OPEN/CLOSE to close the

disc tray.

•When the disc is being identified (“LOAD” is displayed on the Front Panel Display), the DISC IN indicator on the front panel is blinking. The indicator lights when the disc is finished being identified (“LOAD” disappears).

•Some discs start playback automati- cally.

6 Press PLAY to start playback.

•If you’re playing some DVD-Video discs, a disc menu screen may appear. See page 45 for how to operate the menu.

7 Press ■STOP to stop playback.

•When starting playback from the place last stopped, go to step 8.

•When starting playback from the beginning, go to step 9.

Resume Function

This recorder stores the location where you stopped the disc. This function enables you to resume the playback from the place last stopped.

8 Press PLAY after pressing

■STOP in the step 7.

•Play resumes from a point slightly before the point where it was stopped.

•Resume information will not be canceled if the power is turned off.

•Resume function may not work on some discs.

RES.

DVD

NOTE

The resume function is canceled in the following cases.

•When you press ■STOP during auto- playback.

•When you open the disc tray.

•When you display the DiscNavi screen.

•When a DVD-R/RW disc has been edited or finalized after playback has been stopped.

•When you switch between ORIGINAL and

PLAYLIST.

Playback From the Beginning

9 Press ■STOP again.

10 Press PLAY.

NOTE

•When taking out a disc, first press ■STOP before taking out the disc. When the OPEN/CLOSE is pressed during playback, it may take a short time for the tray to open.

•In cases when a disc cannot be played back as a result of inserting a non-standard disc or the presence of scratches and so forth on the disc “INCORRECT TYPE. REMOVE DISC.” will appear and all other functions of the recorder will be disabled except for opening and closing of the tray. Take out the disc when this happens.

29

DV_RW2U#p29-36.p65 29 03.1.9, 8:16 PM