TV Program Recording

POWER

TIMER

DISC

OPEN/

 

ON/OFF

TIMER

CLOSE

ANGLE

AUDIO

CH

SETUP/

DNR

ZOOM

INPUT

FUNCTION

TITLE

 

 

MENU

RETURN

 

 

SET/

 

 

ENTER

 

 

 

VCR PLUS+

 

 

TIMER PROG.

 

 

 

REC MODE

AM/PM

 

ERASE PROGRAM

100

 

 

 

REV

 

 

FWD

 

PLAY

 

REC

 

STILL/PAUSE

 

STOP

 

SKIP

F.ADV

SLOW

SEARCH

SKIP

DISPLAY

ON

ORIGINAL/

EDIT

SCREEN

PLAY LIST

POWER

INPUT

VOL

CH

TV CONTROL

Stop Recording

DVD RW

 

DVD RW

 

DVD R

VR MODE

 

VIDEO MODE

 

Press STOP during recording.

Stop recording before you remove the disc from the recorder,

NOTE

Since images are recorded in 30 second units in the Video mode (1 minute units in the LP mode), images may be briefly recorded after recording has been stopped. In this case, if recording is stopped after first pausing the recording, a black screen will be recorded for up to 30 seconds (or up to 1 minute in the LP mode).

A black screen may be recorded at the end of a recording when a recording in the VR mode is stopped after pausing.

Erase recorded titles when they are no longer required (page 71). In the case of a disc recorded in the VR mode, remaining recording time increases by the amount of original titles erased. In the case of discs recorded in the Video mode, although titles are no longer displayed, remaining recording time does not increase. (In the case of DVD-RW discs, remaining recording time only increases when the last title has been erased.)

STOP does not function for the first 5 seconds of a recording. (Press STOP 5 or more seconds after recording begins.)

Useful Recording

Functions

Watching Other TV Programs while Recording

The TV channel can be changed by pressing the channel button on the TV. The TV can also be turned off.

Accurately Starting Recording from a Desired Part

When recording onto a DVD-RW or DVD-R disc, a brief amount of time is required until recording begins (about 2 seconds for DVD-RW discs and about 10 seconds for DVD-R discs). Start recording using the following procedure when you want to start recording at a precise time.

ÆWhen recording onto a DVD-RW disc:

Press STILL/PAUSE Immediately after earlier pressing ÆREC to pause

recording, and then once the record- ing reaches the scene you want to record, press ÆREC to start recording from that scene.

STOP does not function while recording is paused. If you want to stop recording, press STOP after waiting at least 5 seconds after recording has started.

ÆWhen recording onto a DVD-R disc:

Set the “R REC START” setting of the “RECORD SETUP” to “2 PRESS”. Recording is paused for about 10 seconds later after ÆREC is pressed once. When ÆREC is pressed for a second time while recording is paused, you can accurately start recording from the scene you want to record.

If “R REC START” of the “RECORD SETUP” is set to “1 PRESS”, recording starts automatically about 10 seconds later after ÆREC is pressed (the Pause function does not function).

50

DV_RW2U#p45-53.p65

50

03.1.9, 7:39 PM

Page 50
Image 50
Sharp DV-RW2U manual Stop Recording, Useful Recording Functions, Press Stop during recording