
Timer Recording withVCR Plus+® System
POWER | TIMER | DISC | OPEN/ |
| ON/OFF | TIMER | CLOSE |
ANGLE | AUDIO | CH | |
SETUP/ | DNR | ZOOM | INPUT |
FUNCTION | |||
TITLE |
|
| MENU |
|
|
| SET/ |
RETURN |
|
| ENTER |
|
| VCR PLUS+ | |
|
| TIMER PROG. | |
|
|
| REC MODE |
AM/PM |
| ERASE PROGRAM | |
100 |
|
|
|
REV |
|
| FWD |
| PLAY |
| |
REC |
|
| STILL/PAUSE |
| STOP |
| |
SKIP | F.ADV | SLOW | |
SEARCH | SKIP | ||
DISPLAY | ON | ORIGINAL/ | EDIT |
SCREEN | PLAY LIST | ||
POWER | INPUT | VOL |
CH
TV CONTROL
DVD RW |
| DVD RW |
| DVD R |
VR MODE |
| VIDEO MODE |
|
The VCR Plus+ Programming System allows you to program your recorder for timer recording simply by inputting the PlusCode Programming number.
The PlusCode numbers are listed in most newspaper, television guides, and local CATV listings. Simply by inputting this PlusCode number, you can program your recorder for timer recording, eliminating the need to input program start time, stop time, channel, date and other information necessary for timer recording.
Up to 8 timer programs can be stored in the recorder.
1 Press POWER and load a
recordable disc.
•Timer recording does not work during loading a disc. Start the timer setting after the disc is finished being identified.
Important!
•Check that the clock is displaying the correct time.
•When you record SAP broadcast, setting “SAP” in “RECORD SETUP” to “ON” (See page 87).
•When you press ■STOP to stop timer recording, the timer standby mode will be canceled. Press TIMER ON/OFF to enter the timer standby mode if you set other timer recordings. The TIMER indicator lights up.
2 Press VCR PLUS+ to display the
VCR PLUS+ setting screen.
•If you press VCR PLUS+ when the clock has not been set, the clock setting screen will appear.
TIMER PROGRAM
PLUSCODE NO.
ONCE | WEEKLY DAILY |
REMAIN: 1h11m FINE
USE NUMBER KEYS
SELECT :
ENTER : ENTER RETURN:
3 Press number buttons to enter
“PLUSCODE NO.” and then press
".
•If you make a mistake in entering the numbers, press ERASE to erase the numbers one by one or press \ / to move the cursor, then
TIMER PROGRAM
PLUSCODE NO. 1234
ONCE | WEEKLY DAILY |
REMAIN: 1h11m FINE
SELECT : CHANGE:
ENTER : ENTER RETURN:
4 Press \ / to select “ONCE”,
“WEEKLY” or “DAILY” and then
press SET/ENTER.
•ONCE: To record only once.
•WEEKLY: To record every week at the same time.
•DAILY: To record everyday at the same time.
5 The timer program information is
shown on the TV screen. Check
the contents.
•If you want to change any settings, press \ / to select items and press ' / " to correct.
•When recording a program on a channel for the first time, you must enter the correct channel number on the screen, other wise the PlusCode number will not be successfully decoded.
TIMER PROGRAM 1/2
DATE CH START STOP 1/08 06 9:00PM 9:30
-
-
-
REMAIN: 1h11m FINE
PLEASE CHECK CHANNEL
SELECT : CHANGE:
ENTER : ENTER RETURN:
6 Press SET/ENTER. The VCR
PLUS+ setting screen will appears.
To program additional timer
settings, repeat steps 3 to 6.
52
52 | 03.1.14, 9:32 AM |