
Connecting to Audio Equipment
Recording Material from
External Equipment
DVD RW |
| DVD RW |
| DVD R |
VR MODE |
| VIDEO MODE |
|
You can record material from equipment connected to one of the external input jacks of this recorder (IN 1, IN 2 or IN 3).
1 Setup
1Connect the equipment to an external input jack of this recorder.
The Recorder
POWER |
|
|
|
| OPEN/CLOSE | CHANNEL | TIMER ON/OFF |
| |
|
|
|
|
|
|
|
|
| REC |
|
|
|
|
| DISC |
|
|
|
|
DV IN/OUT | VIDEO | STANDBY | TIMER | STILL/PAUSE | PLAY | STOP | |||
RESET |
|
|
|
| SKIP | ||||
|
| DISC IN |
| AV |
|
|
|
| |
|
|
| TIMER | AUTO REC |
|
|
|
|
To VIDEO/AUDIO
IN jacks
Video/Audio cable (Supplied)
To VIDEO/AUDIO output jacks
External equipment
2Place a disc for recording in this recorder.
2 Select the external input audio.
•Refer to the section on “EX. AUDIO” (page 86) or the section on
3 Press INPUT.
•The setting changes in the order of DV (DV Input), L 1 (External Input 1), L 2 (External Input 2), L 3 (External Input 3), Channel and then back to DV (DV Input) each time this is pressed.
4 Perform the procedure for recording with this
recorder.
NOTE
•Material protected with a copy guard cannot be recorded. In addition, proper images may not be able to be viewed even when only viewing such material without recording.
99
99 | 03.1.9, 7:53 PM |