Call Restriction

Activating Call Restriction

Follow the steps below to activate Call Restriction.

♦To activate Call Restriction, at least one stored destination must be permitted to be used.

1 Press

SECURE

, then until [CALL RESTRICTION] appears.

•If the display shows [ENTER PASSWORD] after you press

2

3

SECURE , enter the administrator code and press START .

Press .

Display: [ACT. CALL RESTRICT]

Press (ON) to activate Call Restriction, or (OFF) to deactivate Call Restriction.

4 Press STOP to exit.

When Call Restriction is activated

When Call Restriction is activated, after the user specifies the destination by pressing a Rapid Key, entering a Speed Dial number, or searching, the machine will check whether or not the number is permitted to used.

♦If the destination is permitted to be used, [APPROVED] will briefly appear and the machine will perform the transmission.

♦If the destination is not permitted to be used, [NOT APPROVED] will briefly appear. Remove the document from the feeder and ask your administrator about the destination.

Note: The permission setting is associated with the stored fax number or e- mail address itself; not with the Rapid Key or Speed Dial number in which the number or address is stored.

98