Scan to Folder / FTP
2 Select the destination using one of the following methods:
•If the destination has been stored in a Rapid Key, press the Rapid Key.
SPEED DIAL
• If the destination has been stored in a Speed Dial number, press and enter the Speed Dial number.
• To search for the destination, press SCAN TO FOLDER , press | or |
until the name or address appears, and press START . |
|
3 If you need to specify either of the file options, press 
and go to
Step 4 below. (Note that settings selected here are temporary. To make permanent changes, change the settings in the Web page as explained on pages 49 and 50.)
If you do not wish to change the file options, go directly to Step 6.
4 Press 
or 
until the desired option appears, and then make a selection for the option as explained below.
•FILE FORMAT: Select the format of the scanned image file. Press 
for
TIFF or 
for PDF.
•FILE NAME: To use an automatically generated file name for the scanned
file, press 
(AUTO). To assign a custom name, press 
(CUSTOM),
enter the desired name with the letter keys (max. 40 characters), and press
| START . |
|
5 | When you have finished configuring the file options, press | or |
| until the display shows [PRESS START TO SCAN]. |
|
6 | Press START to begin transmission. |
|
2. Network Scanning
51