Basic Setup

Connecting the machine to your network

To use the Scan to E-mail and Scan to Folder functions, and to use the machine as a printer, you must connect the machine to an Ethernet network. In addition, to use Scan to E-mail, the network must have an Internet connection. A typical setup is shown below.

The machine is connected using an Ethernet cable (not included). Please purchase a 10Base-T/100Base-TX straight-through (regular) cable.

Connect one end of the cable to the LAN port on the machine. Connect the other end to a LAN port on your switch or hub.

Router

Internet

LAN cable

LAN cable

LAN ports

LAN cable

Switch/Hub

♦If you are uncertain which port to connect the cable to, see the manual for the router, switch or hub.

♦The connections can be made with all devices powered on.

To communicate on your network, the machine must have an IP address. To set the machine’s IP address and configure other network settings, see page 29.

1. Installation

17