Problems and Solutions
Problem |
| Solution |
|
|
|
No dial tone when you | • | Make sure the handset cord is connected to the |
pick up the handset or |
| correct jack. See Connecting the handset on page 15. |
press the SPEAKER key. |
|
|
| • | Make sure that the telephone line is properly |
|
| connected to both the TEL. LINE jack and the wall |
|
| jack (see page 16). |
| • | Make sure that the telephone line is good. |
|
|
|
Dialing is not possible. | • | Make sure the power cord is properly plugged into a |
|
| power outlet. |
| • | Make sure that the telephone line is properly |
|
| connected to both the TEL. LINE jack and the wall |
|
| jack (see page 16). |
| • | Make sure that the machine is set to the correct |
|
| dialing mode for your telephone line. See the |
|
| procedure on page 136 and “DIAL MODE” on page |
|
| |
|
|
|
The power is on, but no | • | Make sure that the receiving machine has paper. |
transmission takes place. |
|
|
| • | If the receiving machine is in manual mode with no |
|
| attendant, reception will not be possible. |
| • | Check the display for error messages. |
| • | Pick up the handset and check for a dial tone. Dial the |
|
| receiving machine manually and make sure that it is |
|
| responding (you should hear a fax tone). |
|
|
|
Nothing is printed at the | • | Make sure that the document for transmission is |
receiving end. |
| placed face down in the feeder. |
|
|
|
12. Trouble- shooting
155