Call Restriction

Storing/editing destinations with a permission setting

The following procedure can be used to specify the permission setting at the same time as you store a new fax number or e-mail address. This saves you the trouble of first storing the destination using the regular procedure and then using the permission procedure to permit the destination to be used.

In addition, you can use this procedure to cancel the permision setting of a previously stored destination.

1 Press

SECURE

, then

until [CALL RESTRICTION] appears.

•If the display shows [ENTER PASSWORD] after you press

SECURE , enter the administrator code and press START .

2 Press , then until [SET PERMITTED #] / [1=NEW, 2= SEARCH] appears.

3

Press

(NEW).

4

 

To store a new fax number, follow steps 2 through 7 of the storing

procedure that starts on page 60. To store a new e-mail address, follow steps 2 through 8 of the storing procedure that starts on page 39.

To cancel the permission setting of a previously stored fax number (or otherwise edit the number), follow steps 2 through 7 of the editing procedure that starts on page 62. To cancel the permission setting of a previously stored e-mail address (or otherwise edit the address), follow steps 2 through 8 of the editing procedure that starts on page 40.

5 The display will show [PERMIT TO SEND?]. Press (YES) to permit

the destination to be used, or (NO) to cancel permission.

6 Complete the remaining steps of the storing or editing procedure.

5. Security Functions

99