Setting the Date and Time

Setting the Date and Time

Set the date and time as explained below.

♦The date and time will be printed automatically at the top of all fax pages you send (this is required by FCC regulations). The date and time also appear in the display.

♦To have the clock automatically move forward and backward at the beginning and end of daylight-saving time, turn on the “DAY LIGHT SAVING” setting (pp. 136 and 139). Do this before you set the date and time.

1 Press

FUNCTION

until [ENTRY MODE] appears.

, then

2 Press , then until [DATE & TIME SET] appears.

3 Press .

•The currently set date appears (example): [DATE 08-15-2007]

4 Enter a two-digit number for the month (“01” for January, “02” for February, “12” for December, etc.).

Example: January [DATE 01-15-2007]

•To correct a mistake, press to move the cursor back to the mistake and enter the correct number.

5 Enter a two-digit number for the day (“01” to “31”).

Example: the 5th [DATE 01-05-2007]

1. Installation

25