Sharp FO-IS125N Broadcasting using a Group Key, Storing destinations in Group Keys

Broadcasting

Broadcasting using a Group Key

If the destinations to which you want to broadcast have all been stored in one Group Key (see Storing numbers in Group Keys which follows), you can perform the broadcast operation using the following simplified procedure:

1Load the document(s).

• If desired, press	RESOLUTION
	to set the resolution and/or contrast.

2Press the Group key.

•If the group is a fax group, transmission will begin.

•If the group is an e-mail group, you can press to select e-mail options (see Steps 4 to 6 on page 43). When you are ready to begin transmission,

press START .

8. Special Functions

Storing destinations in Group Keys

Follow the steps below to store a group of destinations in a Group Key.

♦Any Rapid Key not already in use can be used as a Group Key. A key cannot be simultaneously programmed as both a Group Key and a Rapid Key.

♦Up to 50 fax or e-mail destinations can be stored in one Group Key.

♦The destinations must be all fax or all e-mail. It is not possible to mix fax and e-mail destinations.

♦Only Rapid Key and Speed Dial numbers can be stored in a Group Key. Full numbers cannot be stored.

113