Network Settings
Network Settings
If your network requires that you assign a static (permanent) IP address to the machine, follow the steps below to disable DHCP (automatic IP address assigment) and configure the network settings.
♦Consult your network administrator for the information that must be entered. After DHCP is disabled, the settings that must be configured appear in the following order (these settings only appear when DHCP is set to NO):
IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS (PRIMARY) DNS (SECONDARY)
1
2
Press | FUNCTION | until [NETWORK SETTING] appears. |
, then |
Press 
. [DHCP] will appear.
3 Press 
for NO (the machine will not obtain an IP address automatically).
4
5
•[IP ADDRESS] will appear.
(If you wish to configure a different setting, press 
or 
.)
Press 
.
Press the number keys to enter the required number.
•Three digits must be entered in each segment of the number (the segments are separated by periods). If a segment does not have 3 digits, enter zeros as needed.
Example: IP address = 192.168.1.2
You must enter: 192.168.001.002
46