Installing the Printer Driver

6. Printing

Installing the Printer Driver

The machine can be used as a network printer.

♦To use the machine as a network printer, it must be connected to your network as explained on page 17, and it must be assigned an IP address as explained on page 29.

The printer driver must be installed on each computer that will use the machine as a printer. Follow the steps below to install the printer driver.

1 Insert the CD-ROM that accompanied the machine into your computer’s CD-ROM drive.

2 In the initial screen that appears, click “Install Printer Driver”.

•If the initial screen does not automatically appear, run “Launch.exe” on the CD-ROM. (Open “My Computer”, double-click your CD-ROM drive, and double-click “Launch.exe”.)

3 Follow the instructions in the windows that appear to install the printer

driver.

•If multiple FO-IS125N machines are connected to your network, the printer driver can only be installed for one machine at a time. (When the list of detected machines appears during the installation, only one of the machines can be selected.) If you wish to install the printer driver for all connected machines, repeat the installation procedure for each machine. (When repeating the installation, the SHARP FO-IS125N Setup Maintenance program will appear after you click “Install Printer Driver” in Step 2. Select Modify to repeat the installation.)

•If a message appears indicating that the software has not passed Windows Logo testing, it does not have a digital signature, or that the publisher cannot be verified (the message may appear more than once), be sure to click “Continue Anyway”, “Yes”, or “Install this driver software anyway” to continue the installation.

102