Authorized Transmission

Using the operation panel to activate Authorized Transmission

Follow the steps below to activate (or deactivate) the Authorized Transmission function using the operation panel.

♦At least one supervisor must be stored before Authorized Transmission can be activated.

1 Press

SECURE

appears.

, then until [AUTH. TRANSMISSION]

•If the display shows [ENTER PASSWORD] after you press

SECURE , enter the administrator code and press START .

2 Press .

Display: [ACTIVATE AUTH. TX]

3 Press (ON) to activate the function, or (OFF) to deactivate the function.

•If [SETUP APPROVER] appears, you must first store a supervisor as expained on page 89.

4 Press STOP to exit.

94