Authorized Transmission

Using the Web page to configure Authorized Transmission settings

To open the Authorized Transmission settings, click Authorized Transmission in the menu frame. The following screen will appear.

Set Authorized Transmission to Enable and select the type of operation that you wish to be authorized in Operation to be authorized.

In Notice to the sender, select when an e-mail is sent to the user to inform him or her of the supervisor’s decision and the status of the transmission.

In Automatic elimination of the image which hasn’t been authorized yet, you can select a time after which a transmission will be canceled if no response is received from the supervisor.

At the bottom of the screen, enter the e-mail addresses of supervisors that are authorized to check transmissions (up to three e-mail addresses can be entered; the user will select one of the supervisors at the time of transmission).

When finished, click submit.

90