Setting up Network Scanning

Using the machine’s operation panel to configure e-mail settings

The machine’s operation panel can also be used to configure several of the e- mail settings.

The settings that can be configured on the machine’s operation panel are shown in the table on the next page. Follow the steps below to display the e- mail settings, and then configure each setting as explained in the table.

1 Press

FUNCTION

until [E-MAIL SETTING] appears.

, then

2 Press , then repeatedly until the setting that you wish to configure appears.

3 Press . (Note: This step is not necessary for the “FILE FORMAT” setting.)

4 Enter the required information for the setting as explained in the table on the next page.

5 After configuring the setting, the next e-mail setting will appear in the display. You can configure the next setting, or press STOP to exit.

2. Network Scanning

35