Sending a Fax by Automatic Dialing

Using the REDIAL key

REDIAL

To redial the last number dialed on the machine, press

be automatically activated. To fax a document, press fax tone after the other machine answers.

START

. The speaker will

when you hear the

Automatic redialing

If you use auto dialing (including Direct Keypad Dialing) to send a fax and the line is busy, the machine will automatically make three redial attempts at intervals of five minutes.

During this time, [RECALLING] will appear in the display, followed by the attempt number. You will not be able to dial any other locations while the message appears.

♦ To clear the message and stop automatic redialing, press STOP . If there are multiple fax numbers being automatically redialed, only the number that was attempted first will appear in the display. To cancel automatic redialing of a different number, see Checking and canceling stored fax jobs on page 67.

Under certain conditions, automatic redialing may stop before three redialing attempts are made.

66