Messages and Signals
PAPER MISMATCHED / | The paper size setting (page 140) does not match the |
CHECK PAPER SIZE | size of paper loaded in the tray. Change the paper size |
| setting or the size of paper loaded in the tray (for a print |
| job from a computer, only the size of paper loaded in the |
| tray can be changed; not the paper size setting). When |
| finished, press START . |
|
|
RCVD FAX TRANSFER | This appears when the Fax to |
| activated (page 120). |
|
|
RECALLING | This appears if you attempt to send a fax by auto dialing |
| and the line is busy or the receiving fax machine does |
| not answer. Your machine will automatically reattempt |
| the call. (See Automatic redialing on page 66.) |
|
|
RECEIVED SECURE FAX | A received fax is being held in memory because the |
| Secure Fax function has been activated. Enter your |
| secure code to print the fax (see page 85). |
|
|
SERVER ERROR | A Scan to |
| because the machine could not connect to your mail |
| server or there was no response from the mail server. |
| Make sure the SMTP server setting is correct (p. 32). If |
| you have configured “POP before SMTP” settings in the |
| Web page, make sure these settings are correct. If |
| [CABLE DISCONNECTED] appears on the bottom line, |
| see “CONNECTION ERROR” on page 159. |
|
|
SERVER NOT FOUND/ | See “CONNECTION ERROR” on page 159. |
CABLE DISCONNECTED |
|
|
|
SERVER NOT FOUND/ | A Scan to |
DHCP | because the machine was unable to automatically |
| obtain an IP address. Restart your router or other device |
| that acts as your DHCP server. |
|
|
SERVER NOT FOUND/ | A Scan to |
SMTP | because an incorrect host name is entered for your |
| SMTP server. Check the SMTP server setting (p. 32). |
|
|
THERMISTOR ERROR | If this message appears, unplug the power cord and |
| then plug it back in. If the message still appears, call for |
| service. |
|
|
12. Trouble- shooting
161