Messages and Signals
FAX RX IN MEMORY | A fax has been received in memory because the toner |
| cartridge needs replacement, you have run out of |
| printing paper, or the paper is jammed. Another |
| message will alternate with this message to indicate the |
| problem. The fax will print out automatically when the |
| problem is fixed. |
|
|
HEATER HIGH / | If this message appears, unplug the power cord and |
HEATER LOW / | then plug it back in. If the message still appears, call for |
LASER ERROR | service. |
|
|
LINE ERROR | Transmission or reception was not successful. Press |
| STOP to clear the message and then try again. If the |
| error persists, see Line error on page 154. |
|
|
M: xx% | This shows the percentage of the machine’s memory |
| currently in use. |
|
|
M#xxx | This appears while a document is being scanned and |
| indicates the memory number assigned to the job (the |
| number appears in “xxx”). This number appears when |
| you check or cancel a job with the INFO key (page 67). |
|
|
MEMORY FULL | If faxes have been received to memory because printing |
| is not possible, resolve the problem so that printing can |
| continue (see Reception to Memory on page 70). |
| If faxes are being held in memory because the Secure |
| Fax function has been activated, print the faxes as |
| explained on page 85. |
| If you are attempting to broadcast or transmit from |
| memory, see If the memory becomes full on page 112. |
| If you are copying, see If MEMORY FULL appears on |
| page 110. |
|
|
OUT OF PAPER / | Printing was canceled because the tray is out of paper. |
PRINT CANCELED | Press any key to clear the message, add paper, and |
| repeat the print job. |
|
|
PAPER JAMMED | The printing paper is jammed. See page 165. |
|
|
160