Sharp JW-20CM, JW-20RS manual 142

From the previous page

Set top address of register link area on slave station 01 to 77(8) (at standard function)/ number of offset bytes (at memory capacity save function)

File address: OCT (octal), word

File number/flag: HEX (hexadecimal), byte Set the "same" as or "different" from the master station: HEX (hexadecimal) , bytes.

Set in parameter addresses 004404 to 004777(8). These top addresses should not overlap the

register link area, flag area, or any area used by other option module.

Slave				004404(8)		Lower		In case of standard function, set top address by file address(8).
	004405(8)					Upper		In case of memory capacity save function, set number of offset
station	004406(8)						bytes.
						File number
01
					004407(8)	·		00(H): The top address is the same address of the master station
					〜	〜		regardless of the values set at of 004404 to 004405(8).
								80(H): The top address is different from the address of the master
		004774(8)				Lower		station (Offset is valid).
Slave	004775(8)					Upper		For the memory capacity save function, set in 80(H).
station	004776(8)					File number
77(8)			004777(8)
						·		00(H)
								80(H)

•In case of setting 0 (the top address is ｺ0440, the same as the address of the master station) in parameter addresses 004404 to 004407(8) (slave station 01) and the offset byte number 8 and “offset valid” on the parameter address 004410 to 004413(8) (slave station 02). (Example for 9·40)

	Slave	Write 0 in parameter 004004 to 004007(8) (same as master
9	station	station).
	01

Write 00008(D) (offset 8) in parameter addresses 004410 to 004411(8).

Slave

station Write 00(H) (file 0) in parameter address 004412(8). 02

Write 80(H) (offset valid) in parameter address 004413(8).

Screen display of JW-13PG

04011 HEX 00

04012 HEX 00 I PARAM.

>04013 HEX 80

To the next page

9·44